Gentex Commander 3 Horn/Strobes and Strobes
The Commander3 Series Colored Lens Signals are wall mount, low profile strobes or horn/strobes that offer dependable audible and visual alarms for warning and emergency notification. Applications include emergency communication, severe weather, emergency response and many more. The GE3 Colored Lens Series are 24VDC units available in lens colors of amber, blue, green and red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candelas. The Commander3 Colored Lens Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander3 Colored Lens Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-Slide® feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the signal to the bracket without showing any screws. The GE3 Colored Lens Series also features the Checkmate®- Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Colored Lens Series are ANSI/UL1638 and ANSI/UL464 listed. The Series is also compliant with the rated candela per the polar dispersion requirements of ANSI/UL 1971. Therefore, the ANSI/UL 1971 polar plot is equal to the candela listed on the product, no derating was required. The Series is warranted for three years from date of purchase.
request information »-
Nominal voltage 24VDC
-
Tamper proof field selectable candela options of 15, 30, 60, 75, and 110
-
Unit Dimensions of 5” (12.7cm) high x 4.5” (11.43cm) wide x 2.5” (6.35cm) deep
-
Lens colors available amber, blue, green and red
-
Super Slide® Bracket
-
Ease of Supervision Testing Checkmate®
-
Instant Voltage Verification
-
Synchronize strobe and / or horn with Gentex AVSM Control Module
-
Prewire entire system, install mounting bracket, then install signals
-
Input terminals accept 12 to 18 AWG
-
Switch selection for high or low dBA Switch for chime, whoop, mechanical and 2400Hz tone
-
Switch for continuous or temporal 3 (not available on whoop tone)
-
Tamper proof re-entrant grill
-
Surface mounts with the GSB (Gentex Surface Mount Box)
-
Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
-
Face plate available in red or off white
-
Approvals
-
ANSI/UL1638 and ANSI/UL464 listed.
-
The Series is also compliant with the rated candela per the polar dispersion requirements of ANSI/UL 1971. Therefore, the ANSI/UL 1971 polar plot is equal to the candela listed on the product, no derating was required.
-